EVERITE (ECG) Machines
The Technology
ECG (Electrochemical Grinding) 
Grinding process in which electrical energy combines with chemical energy for metal
removal. The results are precise cuts free of heat, stress, burrs and
mechanical distortions. 
In the ECG current flows from the workspace to the grinding wheel in a DC circuit. 
A continuous stream of electrolyte flows at the interface of the grinding wheel 
and work-piece. Oxidation of the work piece dissolves the surface of the metal.
This technology is ideal for grinding today’s high strength-to-weight 
materials and also where requirements demand greater precision and 
surface integrity.  
The process is effective regardless of their hardness or strength. 
   Burr-Free Cutting
   Low Cutting Force-Free of heat stress
   No Heat Affected Zone
   No Work Hardening
   No Recast Layer
   No Metallurgical damage
   Faster than EDM
   Cutoff Metals independent of Hardness or Strength
   Harder than Rc65
   Fragile work pieces
   Thin wall work pieces
   Thermo sensitive materials
   When to consider ECG technology
Whenever the part is difficult or costly to deburr, then burr free quality 
of the ECG cut is required. 

Best suited on materials that are difficult to machine by conventional methods
due to materials ease of work hardening or where process heat can damage 
the part. Delicate parts that require low cutting forces.


Sr8 Tube Cutoff machine
  Medical-Hypo tube cutoff-SS tubing-Hydraulic tube-Nuclear fuel rod tubing (Zirconium)-Instrument    tubing (chromatography)
   Cutoff Metals independent of Hardness or Strength
   Harder than Rc65
   Fragile work pieces
   Thin wall work pieces
   Thermo sensitive materials
TTX Table top cutoff machine
 Every tool room-The low cost machine to Crop, Trim or cut to length
   Cutoff Metals independent of Hardness or Strength
   Harder than Rc65
   Fragile work pieces
   Thin wall work pieces
   Thermo sensitive materials
UG824 8” x24” Surface grinder
  Medical device-Power Generation-transportation-hydraulics and pneumatics-valve    mfg-fasteners-automotive-Pointing, slotting, fluting, form grinding, sharpening,    rounding
   Grinding today’s toughest material
   Form grind complex geometry
   Grind materials harder than Rc65
   Grind fragile work pieces
   Grind thin wall work pieces
   Grind thermo sensitive material
AR8 Abrasive cutoff
  Fastener-Aerospace-Automotive-hard alloy solid rod, high temp solid rod, tungsten    alloys
   Cutoff any material
   Cutoff all bar or tube shops
   Maintain metallurgical integrity 
   Minimal kerf los
   Clean smooth cut
   Minimal burr
   Eliminate secondary operations
Company Website:   WWW.EVERITE.COM

 

Contact us today to see how we can be of service to you.

3047 Brentmoor Dr./St. Charles, Missouri 63303/ phone: 636.939.3827 / email: vntur@vtech-1.com